G406s User Guide Document: G406s-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
4
Quick Setup Guide
1. Content in the packing box
➢
The G406s Quad Channel Video Wall Controller
➢
1x RC-400 IR Remote Controller with battery
➢
1x IR Extending Receiver with 1.8m cable
➢
1x AC Main Power Cord.
➢
1x DC 12V Power Supply Unit
➢
Mounting Rack with screw (Option)
➢
Please download UHD Wall Manager PC Tool at
2. Quick Setup via IR Remote Controller
2.1. How to extend distance of IR control
➢
IR remote controller is designed for the operation of G406s.
➢
IR receiver is on Front Panel. One 3.5ø mm audio connector for IR extender is located at Back
Panel of G406s. 1.8m IR extension cable is equipped in the packing. User can add audio cable to
extend the distance up to 20 meters.
2.2. How to avoid IR interference in multiple unit application
➢
If multiple units are used, user can set different [Box ID] (#1 - #99) or IP address in each Box for
individual control. For IR control, the [Box ID] number range is #1 - #9.
➢
User can control individual GeoBox through below method when all boxes or IR extender receivers
are installed together.
✓
Press 851 number key on remote controller will lock all other G406s OSD menu except G406s
with Box ID #1. User can see flashing LED on the Front Panel for the units with OSD locked.
✓
Press 853 will only unlock ID # 3 G406s for further OSD operation and lock all the others.
✓
Press 850 will unlock all G406s OSD Menu. Remote controller can control all boxes at the same
time.
Audio connector for IR extender
