G406s User Guide Document: G406s-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
12
➢
User needs to connect G406s to WiFi Router or switch/hub through RJ45 to LAN port. Then user can
control the system through Ethernet.
➢
Crossover UTP cable can be used for direct connection between PC and GeoBox. User needs to set
PC TCP/IPv4 with the same domain segment as GeoBox (for instance, to set IP address at
192.168.0.105) and subnet mask at 255.255.255.0).
➢
Open web browser (Google Chrome or Internet Explorer) and input G406s IP address (default is
192.168.0.100), user can see GeoBox WebGui and menu with virtual keys similar to OSD for further
system operation. There is no additional software is required.
➢
User can set DHCP for the connection. If necessary, please [Renew] DHCP to get IP address before
network connection.
➢
UWM is another web tool that has full function for system setting and operation. It can also update
Firmware or MCU code. UWM can be downloaded from VNS website.
➢
Each G406s can set different IP address for independent operation and control.
➢
Please use < > OSD keys to select OSD menu items and use
˄ ˅ OSD keys to change IP address.
➢
If GeoBox is connected with WiFi Router (through LAN port), user can control GeoBox through WiFi
via PC, iPad or mobile phone.
➢
Default Telnet port is 23 and TCP server port is 1266.
Please note: RS232 and Ethernet are available for system control. They can be used simultaneously to
provide the most flexibility in system control.
8. Video Wall Settings
➢
Signal source shall be connected before video wall settings. The setting parameters inside GeoBox
will automatically change to match with different input resolution once the setting is finished. If no
signal source is connected during video wall setting, the [Overlap] setting value may be wrong.
➢
Press [Video Wall] hotkey on Front Panel or Remote Controller to activate [Video Wall] menu.
WebGui and UHDWall Manager (UWM) PC tool are available for Ethernet configuration.
