G406s User Guide Document: G406s-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
5
2.3. Quick Video Wall setting through remote controller
1)
Click [RESET] hotkey to clear unnecessary settings.
2)
Click [INFO] key and check input/output timings are correct or not.
3)
Select Channel 1 to do settings.
4)
Click [V. Wall] hotkey to open Video Wall OSD menu.
5)
Use OSD Operation keys to do [Zoom], [Pan] and [Overlap] settings.
6)
If necessary, use [Overlap] hotkey to adjust image position or aspect ratio.
Please repeat
(3) to (6)
processes for all channels.
7)
After finish the settings for all channels, click [Save] hotkey, then click Number key
(7-1)
to save the
final result into [Profile]
→
[Index]. Only 1-5 is valid for selection. User can save twice to different
Indexes as backup.
Click
[Reset] (1)
hotkey again to reset the system to test if the setting is properly saved or not.
8)
Click [Profile] hotkey and click Number key
(7-1)
again to recall the setting and make sure the settings
are saved correctly.
System Information
Channel selection
OSD Menu
operation keys
Input source selection
Output resolution selection
Power on/off
Profile recall hotkey
Video Wall Menu
hotkey
HDMI2.0-2 input port
HDMI2.0-1 input port
RC-400
System reset
hotkey
Profile [Save] hotkey
Video Wall [Overlap]
hotkey
Combination key to work with
other function keys to execute
function to all channels at the
same time
2
1
5
4
6
7
8
Profile recall hotkey
7-1
3
