G406s User Guide Document: G406s-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
14
In the case of 3x3 video wall display, Pan settings are as below:
u
v
w
x
y
z
{
|
}
8.3. [Overlap]
– Position Alignment
[Overlap] adjustment changes the cropping area of the source image so that image position in each
monitor will be shifted. It can compensate Bezel Size of the monitor and correct misalignment in monitor
installation. If overlap value is decreased, each monitor will capture less image area and cause [zoom in]
(enlarged) effect. If overlap value is increased, each monitor will capture more image area and cause
[zoom out] (shrunk) effect. User can also use this function to correct position mis-alignment in installation,
shift image location for irregular video wall and set overlap area for projector edge blending application.
➢
Maximum [Overlap] adjustment value is 1800 pixels in all directions.
For No.
w
monitor: For No.
z
monitor:
Horizontal Pan = 3 Horizontal Pan = 3
Vertical Pan = 1
Vertical Pan = 2
