VNS Therapy SENTIVA M2000 Wand Technical Manual Download Page 3 | Manualshive

Page: 3 / 81

background image

3

The VNS Therapy Programming System supports the delivery of personalized
Vagus Nerve Stimulation (VNS) Therapy for drug-resistant epilepsy (DRE).

This guide contains information on the use of the VNS Therapy® Programming
System with the Model 3000 Programmer and Model 2000 Programming
Wand. Please refer to the VNS Therapy® Programming System Physician’s
Manual for additional important prescribing and safety information.

Indication for Use

The VNS Therapy System is indicated for use as an adjunctive therapy in
reducing the frequency of seizures in patients 4 years of age and older with
partial onset seizures that are refractory to antiepileptic medications.

This overview is not intended to be a substitute for the VNS Therapy
Physician’s Manual.

Please note that not all products shown in this Technical Guide are cleared for
sale in all markets. Please check with your local representative to see what is
available in your area.

INDICATIONS FOR USE

CONTACT INFORMATION

Contact Us

General inqiuries (for questions about LivaNova, LivaNova products, warranties,
etc. or to request a call from company representative) http://www.livanova.
com/contact-us/

24-hour Technical Support

(for technical questions with programmer,

generator, or wand)
• 1 (866) 882-8804 (US and Canada)
• 1 (281) 228-7330 (Worldwide)
• 32 2 790 27 73 (Europe/EMMEA)

Mailing Address

LivaNova USA, Inc (formerly Cyberonics, Inc.)
100 Cyberonics Boulevard
Houston, TX 77058 USA

LivaNova Belgium NV
Ikaroslaan 83 B-1931
Zavantem, BELGIUM

©2019 LivaNova USA, Inc, a wholly-owned subsidiary of LivaNova PLC.
All rights reserved. LivaNova®, SenTiva®, AspireSR®, and VNS Therapy®
are registered trademarks of LivaNova USA, Inc.

«
1
2
3
4
5
...
»

Summary of Contents for SENTIVA M2000 Wand


















































































Reviews:

No comments

Related manuals for SENTIVA M2000 Wand

Brand: Balanced Body Pages: 4

Brand: Oberheim Pages: 40

Brand: Panasonic Pages: 174

Brand: ACE INSTRUMENTS Pages: 2

Brand: ODA Pages: 103

Brand: dbx Pages: 12

Brand: dbx Pages: 13

Brand: dbx Pages: 72

Brand: dbx Pages: 11

Brand: dbx Pages: 16

Brand: Hagerman Pages: 4

Brand: hager Pages: 2

TECSHOW QUAD SPIDER 60

Brand: Ampro Pages: 9

Brand: Taylor Pages: 41

Brand: Uchida Yoko Pages: 40

Brand: VADDIO Pages: 58

Brand: Waters Pages: 4

Brand: Waterpik Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands