Vivotek KA-SD10, Instruction Manual

Page: 19 / 40

[VICON PROTOCOL]
If user wants to choose Vicon Protocol, the user may change the dip switch first.
(Refer to Page #36 DIP SWITCH SETTING - PROTOCOL)
Baud Rate: 4800 (Vicon default)
The operation system is almost same as Pelco D/P protocols but some special features are different way as
noted below’
<Quick Operation Key Table 2: VICON>
Number Note Function
1 ~ 79 +Preset PRESET Execute Preset 1 ~ 79
80~87 +Preset GROUP TOUR Execute Group Tour #1 ~ #8
88~89 +Preset PATTERN Execute Pattern #1 ~ #2
90 + Preset Focus Mode Set Focus Mode Toggle to Auto or Manual
90 + Preset Save Pan/Tilt Lockout PAN/TILT Lock or Unlock setting
91 + Preset Save ZERO POSITION Search For Pan / Tilt Zero Position
92 + Preset Save ALARM Selectable Enable/Disable all Alarms
93 + Preset Save BLC MODE Selectable On/Off in BLC function
94 + Preset Save OSD MAIN MENU To enter OSD Main Menu
95 + Preset Save D/N MODE Selectable Day/Night Mode (Auto/Day/Night Mode)
96 + Preset Save SECTOR SECTOR setting menu entrance
97 + Preset Save DOME Reset Initial DOME Reset - Rebooting
98 + Preset Save AUTO PAN AUTO PAN setting menu entrance
99 + Preset Save Pan/Tilt Speed Manual Pan/Tilt Max Speed setting
<Quick Operation Keys Table 2> Use these function keys if controller has these keys>
Menu Function
Tilt Up / Down Sub menu cursor moves up / down
Pan Left / Right Enter to the sub menu or status change or decrement
Focus Near Using for Enter key when user select YES or NO
Focus Far Using for function changing keys when set coordinate
Zoom Tele Status cursor to the right
Zoom Wide Status cursor to the left
QUICK OPERATING KEYS
19