OSD MENU SETTING
B-8-2.
DOME SET – [NEXT PAGE] – [PASSWORD]
To enter this page to set a password, move joystick or pan key in the right direction. The password
must be set by preset number from 001 to 255
(Default 99)
A. OSD MAIN MENU TABLE (PAGE 14)
default setting is BLANK.
Enter any number from 001~255 on the password blank area and again for confirmation on blank
area. Then “CONFIRMED” is displayed on the monitor and the menu will go back to the previous
page automatically.
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***CANCELLED
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***CONFIRMED
<CONFIRMED>
<CANCELLED>
If you press an incorrect number between PASSWORD and CONFIRM, “CANCELLED” is
displayed on the monitor and the menu will return to the previous page automatically after 3
attempts.
* When a password has been set, the operator must enter the correct password in order to enter
OSD MAIN MENU, or to change any of the domes configuration data
* If you set a password you must ensure that it does not get lost. If this happens the dome must be
returned for workshop repair
24
