15
English
18.
Adjust zoom and focus and open a web console with the camera to tune for the best
image. When zoom and focus is done, Close the top cover and fasten the hex screws
from below.
19.
Firmware configurable options:
Make sure that the external IR is turned on in the night mode, and that the IR cut filter
option is synchronized with the digital input you connected (
default is DI1
).
When the "
Turn on external IR illuminator in night mode
" is selected, a digital output
signal will be triggered to turn on the IR illuminators.
Use the
Media
>
Image
>
Focus
function to tune for a best image focus on your target
area. If using a non-iCS lens model (RBF lens), you should manually tune the focus to be
close to the optimal, and then use the auto scan focus function.
Non-iCS lens
