21
English
Below is the table of configurable data bit (Data1 ~ Data4) values:
bit 31 ~ 24
Device ID: 01 (default) ~ 127
bit 23 ~ 21
Baud rate (0)1200, (1)2400, (2)4800, (3)9600, (4)19200, (5)38400 (default), (6)57600,
(7)115200 bps
bit 20 ~ 16
Brightness: (0) ~ (31), brightness from 0 ~ 100% (default), increment unit is 2.5%
bit 15 ~ 13
LED control mode: (0) DI, (1) Direct, (2) Timer, (3) Light sensor, (4) DI pulse, (5) LPR, (6)
LED dimming by light sensor (default).
bit 12
LED status: (0) Off ready only (default), (1) On
bit 11 ~ 10
Fade in/out: (0) Off, (1) Fast, (2) Slow.
bit 9
DI activation polarity: (0) Low (default), (1) High,
bit 8
DO activation polarity: (0) Low (default), (1) High.
bit 7 ~ 6
Reserved
bit 5 ~ 4
DO mode: (0) Light sensor state (default), (1) LED state, (2) Diagnostic
bit 3 ~ 1
Light sensor day/night threshold: (0) 1 Lux, (1) 5 Lux, (2) 10 Lux, (3) 20 Lux, (4) 50
Lux, (5) 100 Lux, (6) Infinite.
bit 0
LED indicator control: (0) Off, (1) On (default)
You can create custom command buttons by entering the Button name and the command
itself:
Below are some of the command samples:
Threshold 10%
Brightness 100%
FF012101bf0005E7
Brightness 90%
FF012101bc0005E4
Brightness 80%
FF012101b80005E0
Brightness 70%
FF012101b40005DC
Brightness 60%
FF012101b00005D8
Threshold 20%
Brightness 100%
FF012101bf0007E9
Brightness 90%
FF012101bc0007E6
Brightness 80%
FF012101b80007E2
Brightness 70%
FF012101b40007DE
Brightness 60%
FF012101b00007DA
Threshold 50%
Brightness 100%
FF012101bf0009EB
Brightness 90%
FF012101bc0009E8
Brightness 80%
FF012101b80009E4