20
2.Getting Started
Vivitek - D366/D365 Series
USER MANUAL
User Manual v1.1
Mounting the Projector
Caution:
When installing, ensure that you use only UL
Listed ceiling mounts.
For ceiling installations, use approved mounting
hardware and M4 screws with a maximum screw
depth of 8mm (0.315 inch).
The construction of the ceiling mount must be of a
suitable shape and strength. The ceiling mount load
capacity must exceed the weight of the installed
equipment, and as an additional precaution be
capable of withstanding three times the weight of the
equipment over a period of 60 seconds.
Custom Stand Mount Installation compliances
For custom design mount installation such as portait, Please comply to the following :
●
Use 6 screws to securly anchor the projector to the mount.
●
Screw hole center dimension: 71 × 250 (pitch = 125) mm
●
Ensure a sturdy base design to support the projector weight and avoid toppling over.
Note:
The drawing showing below is for referal only. It is not an accurate stand design drawing.
[Side View]
[Front View]
Horizontal adjuster
Air outake
Air intake
