28
3.On-Screen Display (OSD) Menu Settings
Vivitek - D366/D365 Series
USER MANUAL
User Manual v1.1
Video
●
Press
and use ▼/▲ to scroll through submenus
●
Video AGC:
On: enable video auto gain control.
Off: disable video auto gain control.
●
Video Saturation:
Use ◄/► to adjust saturation.
●
Video Tint:
Use ◄/► to adjust Green/ Red color.
●
Closed Captioning:
On: enable video closed captioning.
Off: disable video closed captioning.
Analog
●
Press
and use ▼/▲ to scroll through submenus
●
H Position:
Use ◄/► to adjust the display position in horizontal direction.
●
V Position:
Use ◄/► to adjust the display position in vertical direction.
●
Phase:
Use ◄/► to adjust the frequency to reduce analog RGB image distortion.
●
Clock:
Use ◄/► to adjust the horizontal width of the analog RGB image.
●
Auto Sync:
use ◄/► to select on/off to lock image sync
3D
●
Press
and use ▼/▲ to set 3D source, sync method and 3D format.
●
Before performing 3D setting, make sure that the input signal with 3D sync is connected.
●
3D:
Use ◄/► to enable or disable 3D functions.
Off: disable 3D function.
DLP-Link: enable internal 3D sync.
IR: enable external 3D sync.
●
3D Sync Invert:
Use ◄/► to swap the 3D signal L/R or R/L.
On: enable inverse signal.
Off: follow received signal sync.
●
3D Format:
Use ◄/► to select 3D format type :
Frame Sequential, Top/Bottom, Side By Side, Frame Packing.
Important:
People with the following conditions should view 3D image with great care:
Children under six years in age
People who are sensitive to light or allergic to light, unhealthy and have a history of cardiovascular diseases.
People who are tired or lack of sleep
People who are under the impact of drugs or alcohol
Normally, it is safe to watch 3D images. However, some people might feel uncomfortable. Refer to the guidelines
that were revised and released by the 3D League on December 10, 2008. It states that those who watch 3D
images, need to take a break for at least 5 to 15 minutes every thirty minutes or one hour.
Signal Power on
●
Use ◄/► to set On/ Off to enable or disable auto Power On by input signal.
