45
4.Troubleshooting
USER MANUAL
Vivitek - D366/D365 Series
User Manual v1.1
LED Indicator Messages
LED Code Messages
Power LED
Light LED
Temp LED
System Initial(MCU detects scaler no ack)
2 blinks
OFF
OFF
Ready to Power on (Standby)
ON
OFF
OFF
System Power on
Flashing
Flashing
Flashing
Light Lit , System stable
ON
OFF
OFF
Cooling
Flashing
OFF
OFF
Thermal Break Sensor error
4 blinks
OFF
OFF
Light Fail
5 blinks
OFF
OFF
Light Voltage
5 blinks
7 blinks
OFF
Fan-1 error
6 blinks
1 blinks
OFF
Fan-2 error
6 blinks
2 blinks
OFF
Fan-3 error
6 blinks
3 blinks
OFF
Fan-4 error
6 blinks
4 blinks
OFF
Fan-5 error
6 blinks
5 blinks
OFF
Case Open
7 blinks
OFF
OFF
DAD1000 error
8 blinks
OFF
OFF
Color wheel error
9 blinks
OFF
OFF
Phosphor wheel error
9 blinks
1 blinks
OFF
T1 Over temp
OFF
1 blinks
ON
T2 Over temp
OFF
2 blinks
ON
T3 Over temp
OFF
3 blinks
ON
T4 Over temp
OFF
4 blinks
ON
Note:
In the event of an error, please disconnect the AC power cord and wait for one (1) minute before restarting the
projector. If the Power or Light source LEDs are still blinking or the Over Temp LED is lit, contact your service
center.
Image Problems Q&A
Q. NO image appears on the screen
●
Verify the settings on your notebook or desktop PC.
●
Turn off all equipment and power up again in the correct order.
Q. The image is blurred
●
Adjust the Focus on the projector.
●
Ensure the projector-to-screen distance is within the specified range.
●
Check that the projector lens is clean.
Q. The image is reversed
●
Check the Projection setting on the ALIGNMENT menu of the OSD.
Q. The image is streaked
●
Set the Phase and Clock settings on the Input -> Analog menu of the OSD to the default settings.
●
To ensure the problem is not caused by a connected PC’s video card, connect to another computer.
