39
3.On-Screen Display (OSD) Menu Settings
USER MANUAL
Vivitek - D366/D365 Series
User Manual v1.1
RS232 by Telnet Function
Besides projector connected to RS232 interface with “Hyper-Terminal” communication by dedicated
RS232 command control, there is alternative RS232 command control way, so called “RS232 by
TELNET” for LAN/RJ45 interface.
Quick Start-Guide for “RS232 by TELNET”
Check and get the IP-Address on OSD of the projector.
Make sure that laptop/PC can access the web-page of the projector.
Make sure that “Windows Firewall” setting to be disabled in case of “TELNET” function filtering out by
laptop/PC.
Start => All Programs => Accessories => Command Prompt
Input the command format like the below:
telnet ttt.xxx.yyy.zzz 23 (“Enter” key pressed)
(ttt.xxx.yyy.zzz: IP-Address of the projector)
If Telnet-Connection ready, and user can have RS232 command input, then “Enter” key pressed, the
RS232 command will be workable.
How to have TELNET enabled in Windows 7 / 8 / 10
By default installation for Windows, “TELNET” function is not included. But end-user can have it by
way of “Turn Windows features On or Off” to be enabled.
Open “Control Panel” in Windows
Open “Programs”
