17
2.Getting Started
USER MANUAL
Vivitek - D366/D365 Series
User Manual v1.1
Operating Range
●
The Remote Controller uses infrared transmission to control the projector.
●
It is not necessary to point the remote directly at the projector.
●
The Remote Controller will function properly within a distance radius of about 7 meters (23 feet)
and vertical angle of 15 degrees above or below the projector level.
30º
30º
30º
30º
15º
15º
15º
15º
Note:
If the projector does not respond to the Remote Controller, Move to a closer range or Replace batteries.
Batteries
●
Slide IN/OUT the battery compartment cover.
●
Insert the battery with the positive side facing up.
Caution:
1. Only use AAA batteries (Alkaline batteries are recommended).
2. Dispose of used batteries according to local ordinance regulations.
3. Remove the batteries when not using the projector for prolonged periods.
Combo Key Settings
ID+0
: Reset Remote Controller customer code to default settings.
ID+(1~7)
: Set Remote Controller customer code to “1~7”.
