12
DLP
Setup
This section provides you with instructions on how to unpack and set up your projector
and connect it to other equipment. The projector must be connected to a computer
or a video source such as a DVD or laser disk player in order to make a projection.
You may want to connect the projector to both your computer and a video source, or
set up the projector for one or more of the following:
Provide audio for one or both image sources. The audio source can be the
computer, video source, or another device such as a stereo.
Unpacking the Projector
The projector is shipped with the necessary cables required for standard PC or
laptop computer connections. Carefully unpack and verify that you have all the items
shown below. If any of these items are missing, please contact your local dealer.
Projector
S-Video cable (Mini Din 4 pins)
Soft carrying case
Audio cable (2 Stereo Phone Plug)
Remote Control
Lens cap
2 AAA batteries
Quick Start Guide
Power cord
User's Manual
USB cable
Composite cable (RCA for Video)
VGA cable
Optional accessories:
DVI-D cable
Component Cable (D-Sub 15 pin to RCA *3)
Spare Lamp Kit
DVI to VGA Cable
Control Cable
