8
DLP
External Control Panel
LED Indicator
Indicates the status of the
projector.
Control Panel Button
Turns the projector (or lamp)
ON or OFF.
SOURCE
Automatically/Manually selects
an input source.
ENTER
Confirms the selection of settings.
MENU
Displays (or hides) the on-screen control menus.
AUT O
Automatically adjusts frequency and phase in VGA mode.
Cursor Controller
It can be used as a navigation control to navigate
( / / / )
the projector menus.
Scrolls up through the menu choices.
Scrolls down through the menu choices.
Increases the value setting on the selected sub-menus,
or confirms a menu selection.
Decreases the value setting on the selected sub-menus.
Note:
1. The Infrared Remote Receiver (Front and Rear) allows the projector to accept
signals from the remote control. For best results, aim the remote control toward
the sensor without any obstructions in between.
2. VGA out. You can connect the projector with an external monitor for monitoring
the VGA input signal.
3. When connectting this projector with PC through USB cable, you can set page up
or down of presentation file by pressing PAGE U/DN button on the remote control.
4. RS-232 control port allows you to control the projector with full functions through
PC software. The control cable is an optional accessory.
