EN-62
APPENDIX
Troubleshooting Guide
Symptom
Possible causes
Solutions / Corrective Actions
The power does not
turn on.
The DVR-510
suddenly powers down.
The image is not
captured when the
button is pressed.
The flash does not fire.
Cannot transfer files
over a USB connection.
*
Load new or fully charged battery.
*
Load the battery in the correct direction.
*
Close the battery cover correctly.
* Set the option of POWER OFF to OFF.
* Turn the power back on or charge the
battery.
* Toggle the button to access in
camera mode.
*
Transfer the desired files to your
computer and then delete unnecessary
files, or use a different memory card.
* Slide the write-protect tab to UNLOCK.
*
Select a different flash mode.
* Toggle the button to access in
camera mode.
* Slide the focus switch to the
(normal mode).
*
Check all connections.
*
Install the USB driver on your computer.
*
Turn on the DVR-510.
*
The battery has run out.
*
The battery is not oriented correctly.
*
The battery cover is not closed properly.
*
The function of POWER OFF in SYSTEM
MENU has been activated.
*
The battery has run out.
*
The DVR-510 is in SELECT MODE
(Playback Mode).
*
Memory is full.
* The write-protect tab on the "SD Memory
Card" is set to the LOCK position.
*
(Flash Off)
is selected in flash mode.
*
The DVR-510 is in
(Video)
mode.
* The DVR-510 is in
(macro
mode).
*
USB cable is not connected securely.
*
USB driver is not installed.
*
The DVR-510 is turned off.
