Vivint SmartHome ELEMENT, User Manual, Page: 55 / 59

55
Vivint Element Installation Guide
Customization
Staging
INSTALLER
2.5°
STAGING
Stage 2
Heat at
STAGING
No
Fast
Recovery?
STAGING
STAGING
Yes
Fast
Recovery?
2.5°
Stage 2
Cool at
Staging
Used for multiple stage systems only.
Staging is the number of degrees between
the room temperature and the target
temperature at which the next stage in multi-
stage systems will engage to bring the room
temperature back to the target. The default
is 2°F. The programmable range is 2°F to 6°F
(1°- 3°C).
1. Press DOWN arrow to highlight Staging,
then press the SIDE button. The current
staging value displays.
2. Press UP or DOWN arrow to change
the value, then press the SIDE button
to confirm.
3. Ranges are in .5 increments: 2.5, 3.0, 3.5,
4.0, 4.5, 5.0, default 2.5.
Reset
Reset will restore the thermostat
settings to the factory defaults. It will
also disconnect the thermostat from the
Z-Wave network.
1. Press the DOWN arrow to highlight
Reset, then press the SIDE button.
2. Confirm that you want to reset the
thermostat, select yes, then press the
SIDE button. The thermostat resets.
Please use this procedure only when the
network primary controller is missing or
otherwise inoperable.
Reset
INSTALLER
No
RESET
Factory
Reset?
Yes
RESET
Factory
Reset?
RESET
Resetting