Vivint SmartHome ELEMENT, User Manual, Page: 14 / 59

14
Battery Powered Installation
Install four (4) AA alkaline batteries following the marked polarity in the battery com-
partments. Insert the battery negative end first against the spring, then push the posi-
tive end in.
Vivint Element Installation Guide
Wiring
Reconnecting Power to HVAC System
With all the wires connected and the unit attached to the wall, it is time to turn the
furnace and/or air handler power back on. Reconnect the power at the breaker you
used to switch it off. The Thermostat will power-up in the Setup mode.
Your Thermostat is not yet configured to operate your HVAC system. You must now
connect your thermostat to a Z-Wave Network and configure the HVAC and Heat
Source settings.
Proceed to Setup Section
Installing batteries