Vitrolux E / F
Product description
Stand 5/12
Page 31 of 58
3.5 Motor axis
The laser head can be moved in X, Y and Z direction.
The directions of motion are:
Z-axis (vertical: up +, down -) on the laser head
X-axis (horizontal, right +, left -) on the X-Y plate
Y-axis (horizontal, back +, forward -) on the X-Y plate
The movements are performed by the motor axes which enable high processing speeds and
high processing accuracy.
The size of the loading of table and the controllable area to engrave are depending on the
type of the machine and are:
Machine
Loading table
Engraving area
Vitrolux E-S
750 x 750 mm
700 x 600 x 95 mm
Vitrolux E-M
750 x 1000 mm
700 x 900 x 95 mm
Vitrolux E-L
1250 x 1000 mm
1200 x 900 x 95 mm
Vitrolux E-X
1250 x 1500 mm
1200 x 1400 x 95 mm
Vitrolux F-S
1750 x 2250 mm
1500 x 1700 x 95 mm
Vitrolux F-M
2750 x 2250 mm
2500 x 1700 x 95 mm
Vitrolux F-L
2250 x 3250 mm
1700 x 3000 x 95 mm
Caution
The above values for the engraving area refer to the laser class 4 machines.
Machines laser class 1 - with adjoining doors - the engraving area in x and y
direction is less 20 cm each..
Note
The directions are on the axles with signs referred to
Figure 5: Motor axis X