Vitrolux E / F
Product description
Stand 5/12
Page 26 of 58
3.1 Components comprising the laser system
3.1.1 Overview
The complete processing system consists of the following components:
(1) Laser head
The laser beam is generated in the laser head.
(2) Scan head
The scan head serves to deflect the beam
.
(3) PC Console
The PC console is connected to the control computer. It is used to control the system
and to control the manufacturing process. The required software is installed.
(4) Door(s) (if any)
These doors are manually opened and closed, and are separating the processing
area. The doors are equipped with security contacts who either prevent from opening
the doors during the editing process, or turn off the laser beam with opening. Which
of these options will be executed can be set at the contacts.
(5) Additional buttons and switch on the PC Console
The toolbar contains the emergency off switch, the power switch that releases the
facility to operate, as well as the push button to open and close the doors.
(6) Supply modules
Side of the laser system all necessary to operate supply modules as well as the main
switch are located.
(7) Motor axles
The motor axles of the laser and the scan head are movable in the X, Y, and Z-axis.
The units are connected to each other by means of power cables, control lines and
an optical waveguide.