VITRA ACRYLIC SHOWER TRAYS, Installation And User Manual

Page: 9 / 12

9
9- Perform plastering correction adjustment without leaving any gap between the waterproof membrane and the wall.
10- Glue the waterproof membrane fixated to the shower tray to the f1oor from the front and rear sides with the ceramic adhesive.
Perform plastering correction adjustment without leaving any gap between the waterproof membrane and the wall.
11- In the application of zero to surface shower trays, the wall tiles are laid down by leaving a jointing space from the sides of the shower tray.
12- When tiling the wall and floor tiles for zero to surface shower trays, if the upper edge of the shower tray and the finished floor tiles are required to
be level with the floor tiles then floor tiles are laid by leaving a jointing space from the sides of shower tray.
13- The installation of the zero-to-surface shower tray is complete. Any protective folio remaining on the shower tray should be removed only after all
of the construction works in the bathroom are finished.