1
2
3
4
5
6
7
8
9
Installation Components
Installation of Profile Leg Set for Flat Shower Trays
Placement of the Legs
7
1- Install the plastic foot to the leg, as shown in the picture, using the two nuts. Let it stay loose.
2- Install the support shaft to the leg, as shown in the picture, using the two nuts. Let it stay loose.
3- Using the markings, adjust the leg as shown in the picture, leaving 2-3mm gap between the product’s edge and the leg.
4- Fixate the leg to the product using the 25 mm screws provided with the leg set through the two screw holes.
5- Fixate the support shaft by tightening it the two nuts, so that it will press on the edge frame of the product.
6- Adjust the height of the plastic feet according to the height of the panel.
7- Fixate the plastic feet which you’ve adjusted by tightening the two nuts.
8- Fixate the middle feet of the shower tray to the marked points using the 25mm screws.
• In the New Profile leg set, the pipe legs and its connection part pipe feet comprise of a
profile leg and a support shaft.
9- Adjust the height of the plastic feet according to the height of the panel.
Summary of Contents for ACRYLIC SHOWER TRAYS
Page 1: ...ACRYLIC SHOWER TRAYS Installation and User Manual ...
Page 12: ......
