Transcendent VT-TR5HA DVR Series
35
Ø
Add Scheme
Click
in area 1 to create a new scheme. Click
on the top right corner of the scheme
to delete it.
Ø
Configure Scheme
a)
Select a scheme in area 1 and then click the screen mode button on the tool bar to set the
screen mode of the scheme.
b)
Select a camera window in area 4 and then double click the camera in area 3. The camera
will be added into the selected window. One camera in the same scheme cannot repeat. You
can right-click menu “Clear” in area 2 to remove a single camera or click
to remove all
the cameras.
c)
Click “Apply” to save the settings.
Ø
Start Sequence View
Go to live preview interface and then click
to pop up a window. Set the dwell time in the
window and then click
to start scheme view in sequence. Double click the sequence view
interface to pause the view; double click again to restore the view. Click
to stop the view.
5.2.4 Spot View
Click Start
à
Settings
à
System
à
Basic
à
Output Settings
à
Output 2 to go to the interface as
shown below.
Click
on the left to create a new scheme. Each scheme can only add one analog camera.
Select a scheme on the left and then double click or drag a camera on the right to the scheme
window in the middle of the interface. After finishing the settings of all the schemes, select the
dwell time and click “Apply” to start playing the schemes in sequence in output 2.
Transcendent VT-TR5HA DVR Series
36
5.3 Preview Image Configuration
5.3.1 OSD Settings
Click Start
à
Settings
à
Camera
à
Image
à
OSD Settings to go to the interface as shown below.
Select the camera, input the camera name (or double click the camera name in the camera list to
change the camera name), enable or disable the name and time OSDs (if enabled, drag the red
name and time OSDs directly in the image view area to change the OSDs’ display position) and
select the date and time formats. Click “Apply” to save the settings.
5.3.2 Image Settings
Click Start
à
Settings
à
Camera
à
Image
à
Image Settings to go to the following interface.
Select the camera and then set the brightness, contrast, saturation and hue of the camera. Click
