Transcendent VT-TR5HA DVR Series
103
PTZ
panel introduction:
Button
Meaning
Click
/
/
/
/
/
/
/
to rotate the dome; click
to stop rotating the dome.
Drag the slider to adjust the rotating speed of dome.
Click
/
to zoom in/out camera image.
Click
/
to increase/ decrease the focal length.
Click
/
to increase/decrease the iris of the dome.
Click to view the preset list and then click the button in the list to call
the preset.
Click to view the cruise list and then click the corresponding buttons in
the list to start or stop the cruise.
12.4.2 Remote Playback
Click “Playback” in the remote interface to go to the playback interface.
�
Check the record event types and cameras on the left panel. Set the record date on the
calendar beside the time scale.
�
Click
to search the recorded data and then click
or directly click
the time scale to play the recording.
The operation of the playback time scale is similar to that of the time scale in the main program
of the DVR. Please refer to 8.2 Playback Interface Introduction for details.
Introduction of playback control buttons:
Button
Meaning
Stop button.
Rewind button. Click to play video backward.
Play button. Click to play video forward.
Pause button.
Deceleration button. Click to decrease the playing speed.
Acceleration button. Click to increase the playing speed.
Previous frame button. It works only when the forward playing is paused in single screen
mode.
Next frame button. It works only when the forward playing is paused in single screen mode.
Click
to jump backwards 30s and click
to jump forward 30s.
Backup start time button. Click the time scale and then click it to set the backup start time.
Backup end time button. Click the time scale and then click it to set the backup end time.
Backup button.
Transcendent VT-TR5HA DVR Series
104
Button
Meaning
Backup tasks button. Click it to view the backup status.
Event list button. Click it to view the event recording of manual/schedule/sensor/motion.
12.4.3 Remote Backup
Click “Backup” in the remote interface to go to the backup interface. You can back up the
recording by event or by time.
Ø
By Event
Check the recording type on the left side of the interface and then click
to set the start
time and end time; check the cameras and then click
on the right side to search the
recordings (the searched recorded data will be displayed in the list); check the recorded data in
the list and then click “Backup” button to backup the record.
Ø
By Time
Click
to set the start time and end time on the left side of the interface; check the cameras
and then click
on the right side to backup the recording.
View Backup Status
: Click “Backup Status” to view the backup status. Click “Pause” to pause
the backup; click “Resume” to continue the backup; click “Delete” to delete the task.
12.4.4 Remote Configuration
Click “Function Panel” in the remote interface and then configure the camera, record, alarm,
disk, network, account and authority and system of the DVR remotely. All of these settings are
similar to that of the DVR. See the configurations of the DVR for details.
