VITEK Industrial Video Products – Transcendent Series NVRs
129
11.5.2 E-mail
Click Start
à
Settings
à
AI/Event
à
Event Notification
à
E-mail to go to the e-mail configuration
interface. Set the e-mail address of the recipients. See 13.1.5 E-mail Configuration for details.
11.5.3 Display
Click Start
à
Settings
à
AI/Event
à
Event Notification
à
Display to go to the display
configuration interface. Set the duration time of the pop-up video and the pop-up message box.
If your device support two outputs, please set the output of the pop-up video as needed. After
that, click “Apply” to save the settings.
11.5.4 Buzzer
Click Start
à
Settings
à
AI/Event
à
Event Notification
à
Buzzer to go to the buzzer configuration
interface. Set the delay time of the buzzer and then click “Apply” to save the setting. You can
click “Test” to test the buzzer.
11.5.5 Push Message
Click Start
à
Settings
à
AI/Event
à
Event Notification
à
Push Message to go to the interface as
shown below. Check “Enable” and then click “Apply” to save the settings. If Push Server is
online, it will push messages to the mobile clients.
VITEK Industrial Video Products –
Transcendent Series NVRs
130
11.5.6 Audio
Click Start
à
Settings
à
AI/Event
à
Event Notification
à
Audio to go to the interface as shown
below.
Camera audio settings:
For perimeter alert cameras, voice broadcast can be set up. Select the camera, voice, broadcast
times, volume, and language. Then click “Apply” to save the settings. When an alarm is triggered,
camera will broadcast the voice you set.
Voice: Click “Add” to add the alarm voice in wav. format. Click “Listen” to listen to the uploaded
audio.
Click “Audio Device” to set the audio of the camera.
Summary of Contents for VT-TNR1646PF
Page 185: ...NOTES ...
