Vitek VT-TNR1646PF User Manual Download

Page: 132 / 186

VITEK Industrial Video Products – Transcendent Series NVRs

123

①

Click

behind camera and group to choose the desired cameras and groups.

②

Set the check-in date. You can choose day, week, month and today or customize the time

period.

③

Set the start time and the end time of face check-in.

④

Click “Search” to view the check-in state.

If you want to know the detailed check-in information of someone, please click “Advanced” and
then enter the name and choose the type to search.
Click

to view the detailed information. In this interface, the checked image can be viewed.

Click

to view the registered face picture of this person.

Summary of Contents for VT-TNR1646PF



























































































































































































Search results

Summary of Contents for VT-TNR1646PF

Reviews:

Related manuals for VT-TNR1646PF

Brands by name

Popular brands

Vitek VT-TNR1646PF, User Manual

Search results

Summary of Contents for VT-TNR1646PF

Reviews:

Related manuals for VT-TNR1646PF

Brands by name

Popular brands