Vitek VT-8243, Manual Instruction

Page: 7 / 40

7
ENGLISH
especially near the power plug or at the junction point.
Straighten the cord periodically if it gets twisted during the
hot air brush operation.
•
For easy storing there is a hanging loop (4), you can hang
the hot air styler on this loop provided that no water gets
on the unit in this position.
•
Keep the unit in a dry cool place out of reach of children
and disabled persons.
DELIVERY SET
Hot air brush – 1 pc.
Thermal brush with removable teeth
Ø
20 mm – 1 pc.
Flat brush – 1 pc.
Nozzle – 1 pc.
Manual – 1 pc.
TECHNICAL SPECIFICATIONS
Nominal voltage: 220-240 V, ~ 50 Hz
Rated input power: 800-1000 W
Do not use the unit while taking a bath.
Do not hang or keep the unit in places where it can fall into a
bath or a sink filled with water; do not immerse the unit body,
power cord or power plug into water or other liquids.
RECYCLING
For environment protection do not throw out the unit and
the batteries with usual household waste after its service life
expiration; apply to the specialized center for further recycling.
The waste generated during the disposal of the unit is subject
to mandatory collection and consequent disposal in the
prescribed manner.
For further information about recycling of this product apply
to a local municipal administration, a disposal service or to the
shop where you purchased this product.
IM VT-8243_70x130.indd 7 16.01.2018 12:38:57