Vitek VT-8243, Manual Instruction

Page: 3 / 40

3
ENGLISH
HOT AIR STYLER VT-8243
The hot air styler is used for styling dry or slightly wet hair.
DESCRIPTION
1. Attachment installation place
2. Body
3. Operation mode switch «0-1-2-C»
4. Hanging loop
5. Flat brush
6. Nozzle
7. Thermal brush
ATTENTION!
•
Do not use the unit near containers filled with water
(such as bath, swimming pool etc.) and in rooms with
high humidity.
•
After using the unit in a bathroom, unplug it by taking the
power plug out of the mains socket, as closeness of water
is dangerous even if the unit is switched off.
•
For additional protection you may install a residual current
device (RCD) with nominal operation current not exceed-
ing 30 mA into the bathroom mains; contact a specialist
for installation.
SAFETY MEASURES
Before using the unit, read this manual carefully and keep it
for future reference.
Use the unit for intended purposes only, as specified in this
manual. Mishandling the unit can lead to its breakage and
cause harm to the user or damage to his/her property.
•
Before switching the hot air brush on, make sure that
your home mains voltage corresponds to the unit oper-
ating voltage.
•
To avoid fire, do not use adapters for connecting the unit
to the mains.
•
Do not use the unit outdoors.
•
Use only the attachments supplied.
•
When using the unit, we recommend to unwind the power
cord to its full length.
•
The power cord may not:
– touch hot objects,
– run over sharp edges,
– be used for carrying the unit.
IM VT-8243_70x130.indd 3 16.01.2018 12:38:57