Vitek VT-8243, Manual Instruction

Page: 4 / 40

4
ENGLISH
•
Check the power cord and power plug insulation integ-
rity periodically.
•
Do not switch the unit on in places where aerosols are
sprayed or highly flammable liquids are used.
•
Hair spray shall be applied only after hair styling is fin-
ished.
•
Do not operate the unit while taking a bath.
•
Never leave the operating unit unattended.
•
Do not touch the unit body, the power cord and power plug
with wet hands.
•
Do not place and do not keep the unit in places, where
it can fall into a bath or a sink filled with water, do not
immerse the unit into water or other liquids.
• If the unit is dropped into water, unplug it immediately, and
only then take it out of the water.
•
Do not use the unit when you are drowsy.
•
Do not use the unit to style wet hair or synthetic wigs.
•
Avoid contact of heated surfaces with your face, neck and
other parts of your body.
• Do not drop the unit.
•
Do not put the operating unit on heat-sensitive or soft
surfaces (for instance, bed or sofa) and do not cover it.
•
Do not direct hot air into your eyes or other heat-sensitive
parts of your body.
•
The attachments get hot during use. Allow them to cool
down before removal.
•
Never insert any foreign objects into any unit body open-
ings.
•
Never block the air inlets of the hot air brush, do not
place it on a soft surface (a bed or sofa), where the air
inlets may be blocked. Keep the air inlets free of lint, dust
and hair etc.
•
Avoid getting of hair into the air inlet grid during opera-
tion of the unit.
•
Clean the unit regularly.
•
Unplug the unit after every usage and before cleaning.
•
When unplugging the unit, pull the power plug but not the
power cord.
•
For children safety reasons do not leave polyethylene
bags used as packaging unattended.
ATTENTION! Do not allow children to play with polyethylene
bags or packaging film. Danger of suffocation!
IM VT-8243_70x130.indd 4 16.01.2018 12:38:57