8
ENGLISH
Installing the glass rotary bottom plate
1. Open the oven door (1).
2. Set the roller support (3) of the glass rotary bottom plate in the opening on the oven process chamber bottom.
3. Set the rotary roller ring (4) on the bottom of the process chamber.
4. Carefully set the glass rotary bottom plate (5) by matching its ledges with the grooves on the support (3). Never
set the glass rotary bottom plate with its bottom side up.
Note:
•
Do not prevent rotation of the glass rotary bottom plate (5) while operating the oven.
•
Always use the glass rotary bottom plate (5), roller ring (4) and the roller support (3) when cooking.
•
Food and cookware should be always placed only on the glass rotary bottom plate (5).
•
During operation of the oven the glass rotary bottom plate (5) can rotate clockwise or counterclockwise.
•
If cracks or shears appear on the glass rotary bottom plate (5), replace it immediately.
INSTALLING THE MICROWAVE OVEN
– Before plugging the unit in make sure that the operating voltage and power consumption of the unit correspond
to settings of your mains.
– Connect the microwave oven to a socket with reliable grounding contact.
– Place the microwave oven on a flat stable surface that will bear its weight and max. weight of the food that will
be cooked in it.
– Do not place the unit in places with high moisture and temperature, and near inflammable objects.
– Keep the unit away from children.
– Place the microwave oven keeping at least 20 cm gap between the side and rear walls of the oven and the wall
and 30 cm gap above the unit.
– Do not remove supporting legs from the bottom of the oven.
– Do not block ventilation openings in microwave oven body.
– It is necessary to place the microwave oven away from the TV-set or radio to avoid interferences in the recep-
tion of TV and radio signals.
WARNING:
In case of user-caused oven breakage, the user is deprived of free maintenance and repair of the unit.
MICROWAVE OVEN OPERATION
Current time setting
1. Insert the plug into the mains socket, you will hear a sound signal and the ”
1:00”
symbols will appear on the dis-
play (7). You can set the time in the range from
”0:00“
to
”23:59”
.
2. Press the
”Hours”
button (13), time indication of the format 12 hours (“hr12”) or 24 hours (“hr24”) will flash on.
3. Select the necessary time indication format by repeatedly pressing the “
Hours
” button (13).
4. Set the current time using the buttons (9):
•
“
10 Sec.
” - time setting in minutes with a 1 minute step,
•
“
1 Min.
” - time setting in minutes with a 10 minute step,
•
“
10 Min.
” - time setting in hours.
5. To save settings press the “
Hours
” button (13).
Notes
:
- If the clock is not set, the current time will not be shown.
- If you have not saved settings then in 20 seconds after the last time you used setting buttons the unit will be
switched to the previous settings.
- If you press the ”Stop/Cancel“ button (15) during time setting, the unit will switch to previous settings.
- Press the “Hours” button (13) to see the current time during cooking.
COOKING IN THE MICROWAVE OVEN
Before you start cooking set the necessary cooking mode, microwave power level, cooking time, or choose an
automatic cooking program.
General information
– Insert the plug into the electric socket and set the current time on the display (7).
– Open the door, put the products into the oven chamber. To prevent the oven chamber from getting dirty, cover
products with a protective plastic lid (21). Close the oven door (5).
VT1654_china.indd 8
15.11.2013 11:11:43
