
6
ENGLISH
–
Wait until the coffee maker cools down and
remove the tip (7) from the cappuccinator
pipe (6), wipe the cappuccinator pipe (6) with
a soft damp cloth and wash the tip (7) under
a water jet.
Note:
–
Repeated making of coffee should be per-
formed after at least 5 min interval.
WARMING THE DRINKS
You can warm up your drinks by putting the cap-
puccinator pipe (6) without the tip (7) into the cup
with the drink.
•
Press the steam supply button (19) «
», wait
until the indicator (18) «Ok» lights up.
•
Put the cappuccinator pipe (6) without the
tip (7) into the cup with the drink you want to
warm up, carefully turn the steam supply con-
trol knob (4) «OFF--- +» counterclockwise.
•
Сlose the steam supply by turning the knob
(4) «OFF--- +» clockwise until bumping «OFF».
•
Switch the steam supply off by pressing the
steam supply button (19) «
» again.
•
Switch the coffee maker off by pressing the
on/off button (15) «
», the indicator (16) «I»
will go out.
Note: some water or steam may appear from the
filter holder (12) or the steam nozzle, it is normal.
HOW TO MAKE A GOOD ESPRESSO
–
Use fresh ground coffee for «espresso» cof-
fee makers.
–
Slightly tamp the ground coffee in the fil-
ter (11), you can do it with the back side of the
measuring spoon (20).
–
Coffee strength depends on the quality and
grinding degree of coffee beans. If coffee is
pouring out too long, this means the coffee
powder is too fine or it is tamped too strongly.
DESCALING
For effective operation of the coffee maker we
recommend removing scale every 2-3 months
and when using “hard” water more often.
1.
Make sure that all the control buttons (15, 17, 19)
are in the off position.
2.
Make sure that the steam supply is closed. To
do this turn the knob (4) «OFF--- +» clockwise
until bumping «OFF».
3.
Make citric acid solution: 2 teaspoons and 1 l
of water and pour this solution into the water
tank (3). Install the tank (3) back to its place.
4.
Insert the coffee filter (11) into the holder (12).
5.
Install the filter holder (12) into the coffee
maker. The holder (12) ledges should match
the grooves on the boiler «
», after that turn
the filter holder handle (14) to the right until
bumping «
».
6.
Place a suitable cup on the tray (8) grid (9).
7.
Insert the power plug into the socket.
8.
Switch the coffee maker on by pressing the
on/off button (15) «
», the indicator (16) «I»
will light up.
9.
Press the button (17) «
» and fill a cup of
about 100 ml capacity with water (it is neces-
sary to drain the water from the boiler and fill
the boiler with citric acid solution), switch the
water supply off by pressing the button (17)
«
» again.
10.
Wait until the indicator (18) «Ok» lights up,
then switch the water supply on by pressing
the button (17) «
» and fill a cup of about
100 ml capacity, press the button (17) «
»
again to switch the water supply off and pour
the water out of the cup.
11.
After a while repeat the procedure described
in the paragraph 10 and fill the cup of about
100 ml capacity again.
12.
Press the steam supply button (19) «
», wait
until the indicator (18) «Ok» lights up. Put a
suitable bowl under the tip (7) and slightly
open the steam supply by turning the knob (4)
«OFF--- +» counterclockwise. Carefully turn
the knob (4) «OFF--- +» to the maximal steam
release position, release the steam for about
1 minute, then close the steam by turning the
knob (4) «OFF--- +» clockwise until bump-
ing «OFF» and switch the steam supply off by
pressing the button (19) «
».
13.
Switch the coffee maker off by pressing the
on/off button (15) «
». Wait for 10-15 min-
utes.
14.
Perform the steps 10 and 11 at least 3 times.
15.
Repeat the cleaning procedure for the steam
release channels described in the para-
graph 12.
16.
With small intervals, repeat the boiler cleaning
procedure (paragraph 10) until the citric acid
solution dissolves in the tank (3) completely.
17.
Switch the coffee maker off by pressing the
on/off button (15) «
».
18.
Fill the tank (3) with clear water up to the maxi-
mal mark, and repeat the steps 10, 12 not less
than 3 times without the 10-15 minute break.
IM VT-1504.indd 6
31.05.2019 14:27:43
Summary of Contents for VT-1504
Page 1: ...1 VT 1504 3 9 16 23 Coffee maker 29 IM VT 1504 indd 1 31 05 2019 14 27 42...
Page 2: ...IM VT 1504 indd 2 31 05 2019 14 27 43...
Page 22: ...22 info vitek ru 3 i i i i i i i i i i i i IM VT 1504 indd 22 31 05 2019 14 27 45...
Page 35: ...35 info vitek ru 3 IM VT 1504 indd 35 31 05 2019 14 27 46...