Vitek VT-1247 VT, Manual Instruction, Page: 7 / 32

7
ENGLISH
–
Clean the iron body with a slightly damp cloth
and then wipe it dry.
–
Scale on the iron soleplate can be removed
with a cloth soaked in vinegar-water solution.
–
After removing scale, polish the soleplate sur-
face with a dry cloth.
–
Do not use abrasive substances and solvents
to clean the iron soleplate and body.
–
Avoid contact of the iron soleplate with sharp
metal objects.
STORAGE
–
Before you take the iron away for storage,
clean it and drain all the remaining water from
the water tank (10).
–
Set the temperature control knob (11) to the
«
MAX » position and the continuous steam
supply knob to the maximum position. Insert
the power plug into the socket and let the
unit heat up. When the indicator (9) goes out,
unplug the unit and let it cool down.
–
Set the temperature control knob (11) to the
«
min » position and the continuous steam sup-
ply knob (3) to the position « » (continuous
steam supply is off).
–
Wind the power cord around the base (8).
–
Store the iron vertically in a dry cool place, out
of the reach of children.
DELIVERY SET
Iron – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50/60 Hz
Maximum power consumption: 3000 W
The manufacturer reserves the right to change
the specifications of the unit without a prelimi-
nary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
VT-1247.indd 7 01.07.2014 11:42:08