Vitek Transcendent VT-TTAR Series, User Manual

Page: 87 / 100

Transcendent DVR Series
86
12.3 Web Remote Control
The supported browsers of the remote surveillance are IE8/9/10/11, Firefox, Opera and Chrome
(available only for the versions lower than 45) in Windows system and Safari in MAC system.
When you access the DVR through IE for the first time, you need to download and install the
relative components for normal preview and playback. Please refer to the tips in the remote
interfaces for details. The buttons and icons on the top right corner of the remote interface are
introduced as follows.
admin : the current login username.
Logout : click to log out and return to the login interface.
Modify Password : click to change the password of the current login user. Input current
password and then set a new password in the popup window. Click “OK” button to save the
new password.
Local Settings : click it to change the local settings. Set the snapshot number and click “Browse”
to set the snapshot path and record path as shown below. Click “Apply” button to save the
settings.
12.3.1 Remote Preview
Click “Live Display” in the remote interface to go to the preview interface. The preview
interface consists of the four areas marked in the following picture.
Note: If the WAN IP address is a dynamic IP address, it is necessary for you to use the domain name to
access the DVR. Click Start
à
Settings
à
Network
à
DDNS to set DDNS (see 11.1.3 DDNS
Configuration for details). By using DDNS function you can use the domain name plus HTTP port like
http://sunshine.dvrdydns.com:100 to access the DVR via internet.