Vitek Transcendent VT-TTAR Series User Manual Download Page 8

Page: 8 / 100

Transcendent DVR Series

Support any area of the image to be zoomed in to a maximum of 16 times of the current

size

Support image and lens adjustment (only available for some cameras)

Support quick camera adding in the camera window of the live preview interface

Disk Management

The DVRs with the 2U case can add a maximum of 8 SATA HDDs; a maximum of 4

SATA HDDs with the 1.5U case, a maximum of 2 SATA HDDs with the 1U case and a
maximum of 1 SATA HDD with the small 1U case

Each SATA interface of the DVR supports the HDDs with max 6TB storage capacity

Support disk group configuration and management and each camera can be added into

different disk groups with different storage capacity

Support disk information and disk working status viewing

Support batch formatting of the disks

Record Configuration

Support main stream and sub stream recording at the same time and batch or single

configuration of the record stream

Support manual and auto record modes

Support schedule recording, sensor alarm recording and motion detection recording

Support schedule recording and event recording setting with different record streams

Support record schedule setting and recycle recording

Support pre recording and delay recording configuration of the event recording

Record Playback

Support time scale operation in quick playback and the playback date and time can be set

randomly by scrolling the mouse; the time interval of the time scale can be zoomed

Support record searching by time slice/time/event/tag

Support time view and camera view in searching by time slice mode

Support time slice searching by month, by day, by hour and by minute and time slice to be

displayed with camera thumbnail

Support event searching by manual/motion/sensor events

Support tag searching by the manual added tags

Support instant playback of the selected camera in the live preview interface

Support acceleration(maximum 32 times of the normal speed), deceleration (minimum

1/32 times of the normal speed) and 30s’ addition or reduction to current playing time

Record Backup

Support record to be backed up through USB (U disk, mobile HDD) interface

Support record to be backed up by time/event/image searching

Support record cutting for backing up when playing back

Support a maximum of 10 backup tasks in background and backup status viewing

Alarm Management

Support alarm schedule setting

Support enabling or disabling of the motion detection, external sensor alarm input and

exception alarms including IP address conflict alarm, disk IO error alarm, disk full alarm, no

Summary of Contents for Transcendent VT-TTAR Series





































































































Search results

Summary of Contents for Transcendent VT-TTAR Series

Reviews:

Related manuals for Transcendent VT-TTAR Series

Brands by name

Popular brands

Vitek Transcendent VT-TTAR Series, User Manual

Search results

Summary of Contents for Transcendent VT-TTAR Series

Reviews:

Related manuals for Transcendent VT-TTAR Series

Brands by name

Popular brands