Vitek Transcendent VT-TTAR Series User Manual Download Page 67

Page: 67 / 100

Transcendent DVR Series

Enable or disable “Snap”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”, “Pop-up

Message Box” and “E-mail”. The Video Loss Settings are similar to that of the sensor alarm
(see 9.1 Sensor Alarm for details).

Click “Apply” to save the settings.

9.3.3 Exception Handling Settings

Click

Start

Settings

Alarm

Exception

Exception Handling Settings

to go to the

interface as shown below.

Enable or disable “Alarm-out”, “Buzzer”, “Pop-up Message Box” and “E-mail”. The

exception handling settings are similar to that of the sensor alarm (see 9.1 Sensor Alarm for
details).

Click “Apply” to save the settings.

9.4 Alarm Event Notification

9.4.1 Alarm-out

Click

Start

Settings

Alarm

Event Notification

to go to the following interface.

Summary of Contents for Transcendent VT-TTAR Series





































































































Search results

Summary of Contents for Transcendent VT-TTAR Series

Reviews:

Related manuals for Transcendent VT-TTAR Series

Brands by name

Popular brands

Vitek Transcendent VT-TTAR Series, User Manual

Search results

Summary of Contents for Transcendent VT-TTAR Series

Reviews:

Related manuals for Transcendent VT-TTAR Series

Brands by name

Popular brands