IFU-08, Rev D | Date: November 2019
Page 22 of 39
Figure 29: Low Battery Status and Indicator for Model 3150
After replacing the batteries, you will need to pair the Model 3150 to the VistaPoint application again.
Pairing a New Model 3150 or Discontinuing Monitoring
During normal operation it may be necessary to connect a different Model 3150 Pulse Oximeter to the
VistaPoint application. Tap the
Disconnect
button in the Pulse Oximeter section to unpair the Model
3150 from the VistaPoint application. After disconnection is complete, a new Model 3150 (or other
supported Pulse Oximeter) may be paired to the VistaPoint application by selecting
Pair New
.
If oxygen saturation monitoring is no longer required, tap the
Disconnect
button in the Pulse Oximeter
section to stop monitoring and to unpair the Model 3150 from the VistaPoint application. Clean and store
the Model 3230 per the instructions in the
Nonin Medical Model 3150 Operator’s Manual
.
Model 3150 Status Alerts
During normal operation of the Model 3150, the Pulse Oximeter section of the VistaPoint application may
display status alerts, which are indicated with yellow text and a yellow border around the section. The
following status alerts may be observed:
Figure 30: Model 3150 Status Alerts