background image

15

WARRANTY

WARRANTY

Vitagoods warrants device to the original purchaser or the person receiving the product as a 
gift against defects in materials and workmanship as based on the date of original purchase 
(“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product 
name and the purchase date from an authorized retailer is considered such proof. Vitagoods 
warrants the device under normal use for a period of one (1) years from the date of retail 
purchase.

WHAT IS COVERED:

The Vitagoods warranty covers new products if a defect in material or workmanship occurs 
and a valid claim is received by Vitagoods within the Warranty Period. At its option, Vitagoods 
will either (1) repair the product at no charge using new or refurbished replacement parts or 
(2) exchange the product with a product that is new or has been manufactured from new, or 
serviceable used parts and is at least functionally equivalent or most comparable to the original 
product in Vitagoods current inventory, or (3) refund the original purchase price of the product.

Vitagoods warrants replacement products or parts provided under this warranty against defects 
in materials and workmanship from the date of the replacement or repair for ninety (90) days or 
for the remaining portion of the original product’s warranty, whichever provides longer coverage 
for you. When a product or part is exchanged, any replacement item becomes your property 
and the replaced item becomes Vitagoods’ property. When a refund is given, your product 
becomes Vitagoods’ property.

Note:  Any product sold and identified as refurbished or renewed carries a ninety (90) day 

limited warranty.

THIS LIMITED WARRANTY DOES NOT COVER:

•   Shipping charges to return defective product to Vitagoods.

•   Product repair and/or part replacement because of improper use or maintenance, 

connections to improper voltage supply, power line surge, lightning damage, retained 

images, or screen markings resulting from viewing fixed stationary content for extended 

periods, product cosmetic appearance items due to normal wear and tear, unauthorized 

repair or other cause not within the control of Vitagoods.

•   Damage or claims for products not being available for use, or for lost data or lost software.

•   Damage from mishandled shipments or transit accidents when returning device to 

Vitagoods.

•   A device that requires modification or adaptation to enable it to operate in any country 

other than the country for which it was designed, manufactured, approved and/or 

authorized, or repair of products damaged by these modifications.

•   A device used for commercial or institutional purposes (including but not limited to rental 

purposes).

•   A device lost in shipment and no signature verification receipt can be provided.

•   Failure to operate per User Manuel.

Register your device online at www.vitagoods.com to ensure warranty confirmation.

Summary of Contents for TRAVEL PULSE

























Reviews: