8
INITIAL START-UP
SETTING DATE, TIME & MEASUREMENT UNITS
Please set the time on your device before use. Having the correct time set ensures
that each record is labeled with the correct time stamp (Year Range: 2012-2052; Time
Format: 12 Hours).
MEM
1. When the monitor is OFF, press and
hold the “SET” button for 2 seconds to
enter “Time Setting” mode.
2. As pictured on the left, the numeral
“12” will begin blinking, representing
the HOUR.
Press “MEM” button to change the
numeral. Each press will increase the
numeral by one.
3. Press the “SET” button again to confirm
the HOUR selection.
Then the numeral representing the
MINUTE will begin blinking.
MEM
MEM
