Visual Circuits Mantis MC, User Manual

Page: 206 / 246

External Control Commands
190
Display Control (DS)
This command enables and disables the screen status and graphic
overlay displays on specified channel(s) within the media player.
The command enables one display and disables the other: only one
display is enabled at a time.
Syntax
xDS<CR>
Response
R<CR>
Remarks
This command is used to call up a graphic overlay onto a specified
channel(s).
❏ 0
disables the channel status display and enables the
graphic overlay display.
❏ 1
enables the channel status display and disables the
graphic overlay display.
❏
Any other value is invalid and returns an error code of
NAK
without changing the state of the graphic overlay.
Examples
0DS
Turns off the channel status display and turns on the graphic
overlay for all channels of the media player. If the graphic
overlay was already enabled on a channel at the time this
command was received, no change is made to that channel.
2@1DS
Turns off the graphic overlay for channel 2 and turns on
channel 2 status display. If the graphic overlay was already
off for that channel no change is made.