Visual Circuits Mantis MC, User Manual

Page: 114 / 246

98
Front Panel Security Code
The Mantis security code consists of pressing from 2 to 6 of the front
panel buttons in a predetermined sequence.
Reset Stats
Allows resetting the basic System Statistics, the number of Watchdog
Restarts and System Starts, to zero. To view these statistics, go to
Diagnostics - General on page 63.
Figure 45. System Settings: Advanced Configuration - Network
Media Type
If the Mantis update procedure appears to be lagging, use this control to
set the Mantis to a specific network/media content combination. The
observed increase in update performance depends on actual network
configuration.
Restart Negotiator
Click to starts Mantis auto negotiating media type with the other end of
the line.
Reset Transceiver
Click to restart the transceiver and signalling on the physical level.
Warning: Security Code Conventions
The Front Panel Security Code must conform to the following
rules:
-
Button 1 must be used and Can Not Be Blank .
- Blank Buttons can not be used in the code: all buttons used
must contain a value.