Visual Circuits Mantis MC, User Manual

Page: 20 / 246

Mantis Multi Channel
™
Quick Start
4
Connections Guide
Video Output Configuration
The basic configuration of the Mantis MC provides multiple types
of video output simultaneously, on a channel-by-channel basis. For
example, it is possible to configure the MC so that Channel 1
outputs to a composite monitor, while Channel 2 goes to a
component or RGB monitor. For more information on configuring
video output types see Mantis System Settings, Video menu, which
is accessible from the front panel or WebView,
Video Settings on
page 73.
Video and Audio Connections
Figure 1. Mantis MC Backplane Audio/Video Connections
CVBS Connections
Connect a composite cable to the corresponding Channel 1 or 2
connector. The Mantis MC uses BNC connectors.
CVBS Input
Video 2
Component
RGB
S-video
Video 1
Component
RGB
S-video
CVBS Audio Out (Left)
CVBS Audio Out (Right)
CVBS Output
Channels
1 2
3 4
Channels
Channels
1 2
3 4
Reserved for future use.
1 2
Channels
3 4
Reserved for
future use.
S/PDIF
Network 10/100
Reserved for
future use.
Serial
RS-232
Analog
Audio