Visual Circuits H-DVP, User Manual

Page: 3 / 89

Federal Communications Radio Frequency Interference
Statement
WARNING: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructional manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense. However, if this
equipment does cause interference to radio or television equipment
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures
❏
Reorient or relocate the receiving antenna.
❏
Increase the separation between equipment and receiver.
❏
Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
❏
Consult the dealer or an experienced radio/television
technician for help.
Compliance with Part 15 of the FCC Rules and
Regulations
This H-DVP system complies with Part 15 of the FCC rules and
regulations. Operation is subject to the following two conditions:
❏
This device may not cause harmful interference.
❏
This device must accept any interference that may cause
undesired operation.