0150-0319A 57
Vista
Triplex
2
CDR/DVD
Port 1
Use this menu to:
•
Enable/Disable POTS and configure the Modem initialisation
string (POTS Setup).
•
Adjust the Baud rate.
POTS Setup
The default modem string (shown below) is for use with Hayes Accura 56k, Diamond Supra Express
56k, and 5686 US Robotics modems in their default conditions. Consult with the modem manual
before attempting to make any changes. It is strongly recommended that the modem initialisation
string only be modified by a qualified technician.
POTS Setup
SEQ key selects character bank
‘1’ key inserts blank character
‘2’ key inserts selected character
@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^
Modem Init String : AT&
F1&K3M0E1Q0V1S0=0&R2&C1&D0&H1
POTS :
DISABLE
[Default Modem String] [CANCEL] [OK]
1.
With the Modem Init String highlighted, press the
Enter
button to enter the Edit mode. The
character bank will appear in the centre of the menu.
2.
Press the
Sequence
button to select the desired character bank.
3.
Rotate the
Shuttle
to navigate the Modem Init String.
4.
Rotate the
Jog
to select a character from the character bank.
5.
Use the
Number 2
button or rotate the
Shuttle
to insert the desired character from the character
bank into the Modem Init String and advance to the next character.
6.
Use the
Number 1
button to insert a blank character.
7.
When finished, press the
Enter
button.
8.
To save the changes and reboot, select
OK,
then press the
Enter
button. The unit will only reboot
if changes were made to the Modem Init String.
9.
To exit the menu without making changes, select
Cancel
, then press the
Enter
button. Pressing
the
Menu
button also exits the menu without making changes.
Baud Rate
POTS Setup
Summary of Contents for Triplex2
Page 88: ...0150 0319A...
