0150-0319A 56
Vista
Triplex
2
CDR/DVD
Current Mode Procedure
1.
Press the Telemetry button to enter the telemetry mode.
2.
Pan and Tilt the camera to the desired position.
3.
Press and release the
Function
button, then press the
Preset
button.
4.
Press the required
Number
button to store the preset.
5.
Repeat the previous 4 steps for the next preset.
6.
When all presets are stored, press the
Telemetry
button to exit the telemetry mode.
Main Menu
→
Telemetry
→
Select AC/DC
Select the drive type, which matches the power
used by the remote Pan/Tilt head or Dome.
Consult your camera head equipment
documentation or supplier to determine the drive
type.
The default setting for all cameras is DC.
Telemetry Select AC/DC
[CANCEL] [OK]
Camera 01:
Camera 02: DC
Camera 03: DC
Camera 04: DC
:
:
Camera 16: DC
DC
3.18 Communications
Use this menu to:
•
Configure the baud rates and settings for the RS232 ports.
•
Configure the network address for the RS485 network.
•
Configure the Ethernet address and networks settings.
•
Configure bandwidth and TCP MTU size
Main Menu
→
Communications
→
RS232
Select the Port you wish to configure and press the ENTER button.
Port 2
Port 1
Summary of Contents for Triplex2
Page 88: ...0150 0319A...