0150-0319A 28
Vista
Triplex
2
CDR/DVD
2.12 The Record CD/CVD Button
To record video to CD or DVD for archival or law enforcement purposes,
follow the steps listed below:
Record CD/DVD
Button
1. Push the Open/Close button on the CD or DVD writer. When the tray
opens insert a blank recordable CD or DVD into the tray. Push
the Open/Close button on the Writer to close the tray.
2. The unit begins writing the QuickWave software to the media so
that the files can later be viewed on any PC with a CD or DVD
drive. When QuickWave is finished loading on OK message will
appear. Click OK to clear.
3. Wait a few moments for the Writer to come ready. To
check the archive devices status use the
Status Display Box
.
The Status Display Box can be viewed by pressing the Camera
Number button twice. The LED will turn green when the device
is ready.
4. Press
the
Record CD/DVD
Button. If the Writer is ready the
Archive Incident screen will appear,
5. Use
the
Jog
to modify the time parameters and use the
Shuttle
to move between the Start and
Stop fields.
6. Press
the
Record
button on the front panel when satisfied. A progress bar appears on the lower
right of the monitor.
7. The Writer will open the media tray when completed.
The video may now be viewed on any PC equipped with a CD-ROM or DVD drive.
The Record CD/DVD Button and Live Viewing
Pressing the Record CD/DVD button while viewing live video will cause the Archive Incident screen to
appear. The unit takes the latest recording as its stop time and fits as much of the previous recording
as the media will hold. The time and size of the archived video can be adjusted by various amounts
depending on where on the Hard Disk the data lies.
The Record CD/DVD Button and Playback
Pressing the Record CD/DVD button while playing recorded video will cause the Archive Incident
screen to appear. The Start and Stop times displayed will be determined by when in the video the
Record CD/DVD button was pushed. The unit will choose an equal (if possible) amount of time before
and after the selection. The time and size of the archived video can be adjusted by various amounts
depending on where on the Hard Disk the data lies.
The Record CD/DVD Button and the Disk Analysis Screen
Pressing the Record CD/DVD button while the Disk Analysis screen is displayed will cause the
Archive Incident screen to appear. The Start and Stop times displayed will be determined by when in
the video the pointer was when the button was pushed. The unit will choose an equal (if possible)
amount of time before and after the selection. The time and size of the archived video can be adjusted
by various amounts depending on where on the Hard Disk the data lies.
Archive Incident
‘RECORD’ to Archive
05/24/2004 10:25:52
Start Stop
10:33:34
Capacity: 557MB
10:25:32
Summary of Contents for Triplex2
Page 88: ...0150 0319A...
