Visonic POWERMASTER-10, Installer'S Manual, Page: 79 / 106

78 D-303222 PowerMaster-10 / PowerMaster-30 Installer's Guide
3.14.2 Enabling / Disabling Partitions
To
enable or disable the
partition feature proceed as follows:
Step 1 Step 2 Step 3
Select "12:PARTITIONING" menu [1] Select whether to enable of disable
Partitioning
[2]
To Step 1
– Enabling / disabling Partitions
[1] Enter the
Installer Menu
and select the "12:PARTITIONING" menu (see section 3.2).
[2] Select between "Disable" (default) and "Enable".
3.15 Exiting the Installer Mode
To exit the Installer Mode, proceed as follows:
Step 1 Step 2 Step 3
[1] [2] [3]
or
– Exiting the Installer Mode
[1] To exit "INSTALLER MODE", move up the menu by pressing the
button repeatedly until the
display reads [
<OK> TO EXIT
] or preferably; press the button once which brings you immediately
to the exit screen [
<OK> TO EXIT
].
[2] When the display reads [
<OK> TO EXIT
], press .
[3] The system exits the “INSTALLER MODE" menu and returns to the normal disarm state while showing the
READY display.
READY 12:00
<OK> TO EXIT
Any screen
12:PARTITIONING
Disable