Visonic POWERMASTER-10 Installer'S Manual Download Page 65

Page: 65 / 106

D-303222 PowerMaster-10 / PowerMaster-30 Installer's Guide

3.6.6 Configuring Motion Cameras for Video Alarm Verification

If equipped with a GSM/GPRS module, the PowerMaster-10 / PowerMaster-30 can communicate to Monitoring
Stations (equipped with Visonic PowerManage server) via the GPRS network, also image clips captured by
Motion Cameras (models Next CAM PG2 & Next-K9 CAM PG2). The Monitoring Station can use the video clips
for verification of Burglary alarms detected by the Motion Cameras. The system can be configured to capture
image clips also upon occurrence of Non-Burglary alarms (i.e. Fire, Duress, Emergency and Panic). The server
can then forward the images to the management computer of the monitoring station or to 4 remote computers
via e-mail and/or 4 mobile phones by MMS images.
In addition, the monitoring station can log into the PowerManage server and request the system to provide also
image clips "On Demand" and to forward them as defined in the PowerManage application. To protect customers'
privacy, the PowerMaster-10 / PowerMaster-30 can be customized to enable the "On Demand View" only during
specific system modes (i.e. Disarm, Home & Away) and also to a specific time window following an alarm event. In
this section you can program the 4 e-mail addresses and mobile phone numbers to which the images will be
forwarded and to configure the parameters of the "On Demand View" according to your customer's needs.

Means
scroll

and

select

To configure an option enter the

menu, select the option you wish to configure (see

guidance above and in section 3.6.1), then refer to the table below which provides you with detailed
explanations and configuration instructions for each option.

Option

Configuration Instructions

Here you can enter the four e-mail addresses and/or 4 mobile phone numbers to which
you wish the PowerManage server to forward the image clips captured by the Motion
Cameras.
To program:

Press

to enter the

sub menu and then select and program each

of the four e-mail numbers and then each of the four mobile phone numbers. When
done, press

to return.

Enter the 1

, 2

, 3

and 4

e-mail addresses in their corresponding locations (see note

below) then enter the 1

, 2

, 3

and 4

mobile phone numbers in their corresponding

locations (1

MMS tel # etc.)

Note:

enter the e-mail addresses,

move the cursor

and

clear digits

, use the

"String Editor's" keys as described in the table at the end of section 3.6.3.

Here you can enable the "On Demand View" and determine during which arming modes
(system states) the "On Demand View" will be permitted. In the next Option "VIEW TIME
WINDOW" you can determine when during the permitted arming modes the "On
Demand View" will be enabled.

Option settings:

Disabled

(default);

in all modes

;

in AWAY only

;

in HOME only

;

HOME & AWAY; DISARM & AWAY

;

DISARM & HOME

;

in DISARM only

“VIEW TIME

WINDOW” menu

appears only if an

option other than

"Disabled" is selected

in “VIEW ON

DEMAND”

If the "On Demand View" is enabled in the previous option, you can further determine
here whether the "On Demand View" will be possible at any time during the selected
arming modes (i.e. "Always") or restricted only to a specific limited time window that
follows an alarm event.

Option settings:

Always

(default);

Alarm + 5 min.

;

Alarm + 15 min.

;

Alarm + 1 hour

VIEW TIME WINDOW

IMAGE FORWARD

4th e

mail