66
D-303222 PowerMaster-10 / PowerMaster-30 Installer's Guide
Option
Configuration Instructions
Here you configure the Upload/Download functionality via PSTN. The functionality is
determined through a sub-menu of the
PSTN UP/DOWNLOAD
PSTN UP/DOWNLOAD
PSTN UP/DOWNLOAD
PSTN UP/DOWNLOAD
option as shown below.
To program:
Press
to enter the
sub menu and then select and configure
each of the the five sub-menu options as shown below. When done, press
to
return.
Here you enable or disable the
remote access
to the system. If disabled, the system
can not be
accessed
from remote thereby inhibiting the Upload/Download and the
Remote Control via PSTN or GSM analog communication channels (see Chapter-5 in
the User's Guide –
Remote Control by Telephone
).
Option settings:
enabled
(default)
; disabled.
Here you determine the 4-digit
password
code that will allow the
Master installer
to
access the system from remote and upload or download data into the PowerMaster-10
panel.
Enter the 4-digit Master Installer download code ("0000" is not a valid code and must not
be used).
Here you determine the 4-digit
password
code that will allow the
Installer
to access the
system from remote and upload or download data into the PowerMaster-10 panel.
Enter the 4-digit Installer download code ("0000" is not a valid code and must not be
used).
Note:
The installer can configure via UL/DL only the options he is authorized to
configure from the control panel.
(Return)
Here you determine whether the downloading/uploading can be performed in Disarm
mode (state) only or in all modes (i.e. Away, Home & Disarm).
Option settings:
any time
(default) or
when system OFF
.
Here you configure the Upload/Download functionality via GPRS. The functionality is
determined through a sub-menu of the
GPRS UP/DOWNLOAD
GPRS UP/DOWNLOAD
GPRS UP/DOWNLOAD
GPRS UP/DOWNLOAD
option as shown below.
To program:
Press
to enter the
sub menu and then select and configure
each of the three sub-menu options as shown below. When done, press
to
return.
Previously known
as "My SIM Tel.#"
Here you enter the PowerMaster-10
SIM card
telephone number. The PowerManage
server at the Monitoring Station sends an SMS message to this number when it needs
the panel to call back the PowerManage server via GPRS for initiating the uploading /
downloading process.
Enter the SIM card telephone number of the panel's GSM module.
Here you enter the
"Caller ID"
(i.e. telephone number) from which
Monitoring Station
#1
(C.S.1) is supposed to send the
SMS message
to the control panel for initiating the
Up/Download process. If the sender's Caller ID matches with the "1
st
caller ID#" , the
PowerMaster-10 will call back the PowerManage server using
"IP RCVR 1"
address as
configured in Section 3.6.4. option 21.
Enter the Caller ID number of the SMS sender from Monitoring Station #1.
Note:
Caller ID#1 must contain at least 6 digits otherwise the process will not work.
(Return)
Here you enter the
"Caller ID"
(i.e. telephone number) from which
Monitoring Station
#2
(C.S.2) is supposed to send the
SMS message
to the control panel for initiating the
Up/Download process. If the sender's Caller ID matches with the "2
nd
caller ID#" , the
2nd caller ID#
Panel SIM
Tel.#
UL/DL modes
1st caller ID#
GPRS
UP/DOWN
LOAD
Inst. UL/DL code
Mast. UL/DL code
Remote access
PSTN UP/DOWN
LOAD
PSTN UP/DOWN
LOAD
GPRS
UP/DOWN
LOAD