6
D-303222 PowerMaster-10 / PowerMaster-30 Installer's Guide
1.1 System Features
The following table lists the PowerMaster-10 / PowerMaster-30 features with a description of each feature and
how to use it.
Feature
Description
Reference
Visual Alarm
Verification
The PowerMaster-10 / PowerMaster-30
when used with Next CAM PG2 PIR
camera enables accurate assessment of
the situation inside the premises by
providing the Monitoring Station with
visual clips captured by motion cameras
when an alarm is triggered in burglary,
fire, and personal alarm situations. The
system sends the clips to the Monitoring
Station automatically for burglary alarms
and, depending on setup, also for fire and
personal emergency alarms
To configure camera settings:
refer to
the Next CAM PG2 Installation
Instructions
To enable fire and personal alarm
verification:
see section 3.6.6
Configuring Motion Cameras for Video
Alarm Verification
On demand
The PowerMaster-10 / PowerMaster-30
can provide images from the Next CAM
PG2 by demand from a remote
PowerManage server. Pictures are taken
based on a command from the monitoring
station. To protect customers' privacy, the
system can be customized to enable the
"On Demand View" only during specific
system modes (i.e. Disarm, Home &
Away) and also to a specific time window
following an alarm event.
To setup the On demand feature:
see
section 3.6.6 Configuring Motion Cameras
for Video Alarm Verification
To request and view images:
refer to the
PowerManage User's Guide, Chapter 5
Viewing and Handling Events
Enrollment
PowerG devices are enrolled from the
control panel. "Pre-enrollment" can also
be performed by entering the PowerG
device ID number (printed on the back of
each device) and then activating the
device in the vicinity of the panel (due to
the possibility of the device being shipped
to the end user prior to this stage).
To understand the enrollment and the
pre-enrollment procedure using the
panel:
see section 3.4.2 Adding
(Enrolling) New Wireless Devices or Wired
Sensors
Configuration
Device parameters and related system
behavior can be configured from the
control panel or from a remote location.
To configure devices from the control
panel:
see Chapter 3 Programming
To configure devices from a remote
location:
refer to the PowerManage User's
Guide Chapter 3 Working with Panels and
to the Remote Programmer PC software
User's Guide, Chapters 6 and 7.
Diagnostics of the
control panel and
peripherals
You can test the function of all wireless
sensors deployed throughout the
protected area, to collect information
To test the function of wireless sensors
and to obtain their received signal
strength indication:
see section 3.9